network/hostapd: Updated for version 0.6.10.

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

network/hostapd/DTIM.patch

@@ -0,0 +1,46 @@
+commit 8fac32f5efa7a7c3fc6eee8d3723a09e7abe27fa
+Author: Jouni Malinen <jouni.malinen@atheros.com>
+Date:   Thu Mar 12 21:57:08 2009 +0200
+
+    Move DTIM period configuration into Beacon set operation
+    
+    This is needed to make mac80211 work with multi-BSS configuration. The
+    previous design ended up setting DTIM period for secondary BSSes before
+    setting the Beacon and driver_nl80211.c was not really prepared for
+    that. Eventually, the Beacon configuration routines should be combined
+    into a single driver operation, but for now, just moving this call is
+    the simplest workaround.
+    (cherry picked from commit eb1f7446b5b86cceb1508f060f5e66e5dd791a4d)
+
+diff --git a/hostapd/beacon.c b/hostapd/beacon.c
+index 1f82d9c..0a192fe 100644
+--- a/hostapd/beacon.c
++++ b/hostapd/beacon.c
+@@ -434,6 +434,10 @@ void ieee802_11_set_beacon(struct hostapd_data *hapd)
+ 	os_free(tail);
+ 	os_free(head);
+ 
++	if (hostapd_set_dtim_period(hapd, hapd->conf->dtim_period))
++		wpa_printf(MSG_ERROR, "Could not set DTIM period for kernel "
++			   "driver");
++
+ 	if (hostapd_set_cts_protect(hapd, cts_protection))
+ 		wpa_printf(MSG_ERROR, "Failed to set CTS protect in kernel "
+ 			   "driver");
+diff --git a/hostapd/hostapd.c b/hostapd/hostapd.c
+index 3fbd3d0..7ed1720 100644
+--- a/hostapd/hostapd.c
++++ b/hostapd/hostapd.c
+@@ -1376,12 +1376,6 @@ static int hostapd_setup_bss(struct hostapd_data *hapd, int first)
+ 		return -1;
+ 	}
+ 
+-	if (hostapd_set_dtim_period(hapd, hapd->conf->dtim_period)) {
+-		wpa_printf(MSG_ERROR, "Could not set DTIM period for kernel "
+-			   "driver");
+-		return -1;
+-	}
+-
+ 	/* Set SSID for the kernel driver (to be used in beacon and probe
+ 	 * response frames) */
+ 	if (set_ssid && hostapd_set_ssid(hapd, (u8 *) conf->ssid.ssid,

network/hostapd/README

@@ -5,7 +5,3 @@ It implements IEEE 802.11 access point management, IEEE 802.1X/WPA/WPA2/EAP
 Authenticators, RADIUS client, EAP server, and RADIUS authentication server. 
 The current version supports Linux (Host AP, madwifi, Prism54 drivers) and 
 FreeBSD (net80211).
-
-This is tested with the madwifi driver, but it should also work with some
-other chipsets.  If you plan to use the madwifi driver, then uncomment the 
-madwifi section in the provided config file.

network/hostapd/hostapd.SlackBuild

@@ -22,7 +22,7 @@
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 PRGNAM=hostapd
-VERSION=${VERSION:-0.5.11}
+VERSION=${VERSION:-0.6.10}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
@@ -62,7 +62,7 @@ mkdir -p $TMP $PKG $OUTPUT
 cd $TMP
 rm -rf $PRGNAM-$VERSION
 tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
-cd $PRGNAM-$VERSION
+cd $PRGNAM-$VERSION/$PRGNAM
 chown -R root:root .
 find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
@@ -70,7 +70,10 @@ find . \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
 
-cat $CWD/config > .config
+cat $CWD/hostapd.defconfig > .config
+# Fix bug with mac80211-based drivers in hostapd 0.6.10
+# http://lists.shmoo.com/pipermail/hostap/2010-February/021118.html
+patch -p2 < $CWD/DTIM.patch
 
 CFLAGS+="$SLKCFLAGS" make
 
@@ -84,9 +87,7 @@ install -D -m 0755 $CWD/rc.hostapd $PKG/etc/rc.d/rc.hostapd.new
 
 DOINST_TMP=$(mktemp)	# temporary holding place
 for i in \
-  hlr_auc_gw.milenage_db hostapd.accept hostapd.conf \
-  hostapd.deny hostapd.eap_user hostapd.radius_clients \
-  hostapd.sim_db hostapd.wpa_psk madwifi.conf wired.conf ; 
+    hostapd.??* *.conf
 do
   cat $i > $PKG/etc/hostapd/$i.new ;
   chmod 0600 $PKG/etc/hostapd/$i.new ;
@@ -101,7 +102,7 @@ find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
   | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
 
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a COPYING ChangeLog README $PKG/usr/doc/$PRGNAM-$VERSION
+cp -ar ../COPYING ChangeLog README* *.txt logwatch $PKG/usr/doc/$PRGNAM-$VERSION
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 
 mkdir -p $PKG/install

network/hostapd/hostapd.defconfig

@@ -17,11 +17,28 @@ CONFIG_DRIVER_WIRED=y
 
 # Driver interface for madwifi driver
 #CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I/tmp/SBo/madwifi-0.9.4/ # change to reflect local setup; directory for madwifi src
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
 
 # Driver interface for Prism54 driver
 CONFIG_DRIVER_PRISM54=y
 
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+CONFIG_DRIVER_NONE=y
+
 # IEEE 802.11F/IAPP
 CONFIG_IAPP=y
 
@@ -64,6 +81,10 @@ CONFIG_EAP_SIM=y
 # EAP-AKA for the integrated EAP server
 CONFIG_EAP_AKA=y
 
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
 # EAP-PAX for the integrated EAP server
 CONFIG_EAP_PAX=y
 
@@ -71,12 +92,30 @@ CONFIG_EAP_PAX=y
 CONFIG_EAP_PSK=y
 
 # EAP-SAKE for the integrated EAP server
-CONFIG_EAP_SAKE=y
+#CONFIG_EAP_SAKE=y
 
 # EAP-GPSK for the integrated EAP server
-CONFIG_EAP_GPSK=y
+#CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
-CONFIG_EAP_GPSK_SHA256=y
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+CONFIG_EAP_TNC=y
 
 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
@@ -88,3 +127,18 @@ CONFIG_RADIUS_SERVER=y
 
 # Build IPv6 support for RADIUS operations
 CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y

network/hostapd/hostapd.info

@@ -1,10 +1,10 @@
 PRGNAM="hostapd"
-VERSION="0.5.11"
+VERSION="0.6.10"
 HOMEPAGE="http://hostap.epitest.fi/hostapd/"
-DOWNLOAD="http://hostap.epitest.fi/releases/hostapd-0.5.11.tar.gz"
-MD5SUM="d99d3566d5f15dfd24df37fcb2ee80ee"
+DOWNLOAD="http://hostap.epitest.fi/releases/hostapd-0.6.10.tar.gz"
+MD5SUM="1ac442d1f984273f108b3de579c1b70d"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 MAINTAINER="Murat D. Kadirov"
 EMAIL="banderols@gmail.com"
-APPROVED="rworkman"
+APPROVED="dsomero"

network/hostapd/slack-desc

@@ -6,7 +6,7 @@
 # customary to leave one space after the ':'.
 
        |-----handy-ruler------------------------------------------------------|
-hostapd: hostapd (Wifi Authenticator) 
+hostapd: hostapd (wifi authenticator)
 hostapd:
 hostapd: hostapd is a user space daemon for access point and authentication
 hostapd: servers. It implements IEEE 802.11 access point management, 
@@ -14,6 +14,6 @@ hostapd: IEEE 802.1X/WPA/WPA2/EAP Authenticators, RADIUS client, EAP server,
 hostapd: and RADIUS authentication server. The current version supports Linux
 hostapd: (Host AP, madwifi, Prism54 drivers) and FreeBSD (net80211).
 hostapd:
-hostapd:
+hostapd: Homepage: http://hostap.epitest.fi/hostapd/
 hostapd:
 hostapd: