system/lvm2-cluster: Added (LVM in a clustered environment).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

system/lvm2-cluster/README

@@ -0,0 +1,3 @@
+Logical Volume Management (LVM) in a clustered environment.
+
+More information post-install can be found in README.SLACKWARE

system/lvm2-cluster/README.SLACKWARE

@@ -0,0 +1,25 @@
+Starting the daemon on boot
+---------------------------
+
+You may wish to add these lines to /etc/rc.d/rc.local to start the service:
+
+  if [ -x /etc/rc.d/rc.clvm ]; then
+    /etc/rc.d/rc.clvm start
+  fi
+
+You may also add these lines to /etc/rc.d/rc.local_shutdown:
+
+  if [ -x /etc/rc.d/rc.clvm ]; then
+    /etc/rc.d/rc.clvm stop
+  fi
+
+Remember to give executable permission to /etc/rc.d/rc.local_shutdown:
+
+  chmod 0755 /etc/rc.d/rc.local_shutdown
+
+Running the LVM cluster system
+------------------------------
+
+Once the corosync and dlm daemons are up and running, configure LVM with:
+
+  lvmconf --enable-cluster

system/lvm2-cluster/doinst.sh

@@ -0,0 +1,25 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.clvmd.new

system/lvm2-cluster/lvm2-cluster.SlackBuild

@@ -0,0 +1,133 @@
+#!/bin/sh
+
+# Slackware build script for lvm2-cluster
+
+# Copyright 2019  Mario Preksavec, Zagreb, Croatia
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=lvm2-cluster
+VERSION=${VERSION:-2.02.154}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+SRCNAM=LVM2
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM.$VERSION
+tar xvf $CWD/$SRCNAM.$VERSION.tar.xz
+cd $SRCNAM.$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Copied from lvm2.SlackBuild
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --disable-readline \
+  --enable-cmdlib \
+  --enable-dmeventd \
+  --enable-applib \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --with-usrlibdir=/usr/lib${LIBDIRSUFFIX} \
+  --mandir=/usr/man \
+  --enable-realtime \
+  --with-lvm1=internal \
+  --enable-pkgconfig \
+  --enable-udev_sync \
+  --enable-udev_rules \
+  --with-udev-prefix="" \
+  --with-device-uid=0 \
+  --with-device-gid=6 \
+  --with-device-mode=0660 \
+  --with-default-locking-dir=/run/lock/lvm \
+  --with-default-run-dir=/run/lvm \
+  --with-default-dm-run-dir=/run/lvm \
+  --with-clvmd-pidfile=/run/lvm/clvmd.pid \
+  --with-cmirrord-pidfile=/run/lvm/cmirrord.pid \
+  --with-dmeventd-pidfile=/run/lvm/dmeventd.pid \
+  --with-clvmd \
+  --with-cluster=shared \
+  --build=$ARCH-slackware-linux
+
+make daemons man
+
+# Some assembly required
+install -D -m0755 -oroot -groot daemons/clvmd/clvmd $PKG/usr/sbin/clvmd
+install -D -m0644 -oroot -groot man/clvmd.8 $PKG/usr/man/man8/clvmd.8
+
+install -D -m0755 -oroot -groot scripts/clvmd_init_red_hat $PKG/etc/rc.d/rc.clvmd.new
+sed -e "s|/etc/sysconfig|/etc/default|g" -i $PKG/etc/rc.d/rc.clvmd.new
+
+install -D -m0755 -oroot -groot lib/locking/liblvm2clusterlock.so.${VERSION%.*} \
+  $PKG/usr/lib${LIBDIRSUFFIX}/lvm2/liblvm2clusterlock.so.${VERSION%.*}
+ln -s liblvm2clusterlock.so.${VERSION%.*} \
+  $PKG/usr/lib${LIBDIRSUFFIX}/lvm2/liblvm2clusterlock.so
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

system/lvm2-cluster/lvm2-cluster.info

@@ -0,0 +1,10 @@
+PRGNAM="lvm2-cluster"
+VERSION="2.02.154"
+HOMEPAGE="https://www.sourceware.org/lvm2/"
+DOWNLOAD="http://mirrors.slackware.com/slackware/slackware64-14.2/source/a/lvm2/LVM2.2.02.154.tar.xz"
+MD5SUM="c2732c004d9da7d7d0602745490337ca"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="dlm"
+MAINTAINER="Mario Preksavec"
+EMAIL="mario at slackware dot hr"

system/lvm2-cluster/slack-desc

@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+            |-----handy-ruler------------------------------------------------------|
+lvm2-cluster: lvm2-cluster (LVM in a clustered environment)
+lvm2-cluster:
+lvm2-cluster: Logical Volume Management (LVM) in a clustered environment.
+lvm2-cluster:
+lvm2-cluster: Homepage: https://www.sourceware.org/lvm2/
+lvm2-cluster:
+lvm2-cluster:
+lvm2-cluster:
+lvm2-cluster:
+lvm2-cluster:
+lvm2-cluster: