slackbuilds_ponce/network/hylafax/config.local.in

# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# This file holds site-specific configuration parameters.
#
# Nothing is defined in here by default, the definitions
# commented out below serve as documentation for what you
# can set in this file or a config.local file.
#
# Note that you do not need to set anything here unless you
# want to override the auto-configuration behaviour and/or
# interactive prompting done by the configure script.
#

#
# Package controls.
#
#DSO="auto"			# configure DSO support (auto|IRIX|no)
#GETTY="auto"			# type of getty support (auto|BSD|SysV)
#PS="auto"			# PostScript support to use (auto|gs|dps|imp)
#SGI2FAX="auto"			# configure SGI image support (auto|yes|no)
#DPS="no"			# install SGI DPS-based RIP (yes|no)
GS="no" 			# install Ghostscript RIP (yes|no)
#IMP="no"			# install SGI Impressario 2.1 support (yes|no)
#REGEX="yes"			# use distributed regular expression package
#UTMP="utmpx"			# type of utmp+wtmp handling (auto|utmp|utmpx)
#NLS="auto"			# enable NLS support (auto|yes|no)

#
# Directory parameters.
#
DIR_BIN="/usr/bin"		        # directory for client apps
DIR_LIB="/usr/lib@LIBDIRSUFFIX@"        # directory for libfaxserver, libfaxutil
DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax"		# directory for client data
DIR_LIBEXEC="/usr/libexec/hylafax"	# directory for libraries&hidden apps
DIR_LOCALE='/usr/share/locale'
DIR_MAN="/usr/man"		        # directory for manual pages
DIR_SPOOL="/var/spool/hylafax"		# directory for spooling area
DIR_SBIN="/usr/sbin"		        # directory for system apps
#DIR_LOCKS="/usr/spool/locks"		# directory for UUCP lock files
#FONTMAP="/usr/share/ghostscript/3.33"	# directorys containing Fontmap files
#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM"		# directorys for AFM files

#
# Miscellaneous parameters.
#
#DEFVRES="196"				# default vertical res for outbound fax
#FILLORDER="MS2LSB"			# bit order of cpu (MSB2LSB/LSB2MSB)
FAXGID="uucp"				# group ID for fax user
FAXUID="uucp"				# user ID for fax user
PAGESIZE="North American Letter"	# default page size
SYSGID="root"				# group ID for system installs
SYSUID="root"				# user ID for system installs
#LOCKS="ascii"				# default UUCP lockfile scheme
#
#PATH_GETTY="/etc/getty"		# pathname of suitable getty program
#PATH_VGETTY="/bin/vgetty"		# pathname of voice getty program
#PATH_EGETTY="/bin/egetty"		# pathname of external getty program
#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail"	# pathname of suitable sendmail program
PATH_GSRIP="/usr/bin/gs"		# pathname of Ghostscript-based RIP
#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP
#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip"	# pathname of Impressario 2.1 RIP
#MANSCHEME="sysv-source-cat-strip"	# manual page installation scheme
SYSVINIT="auto"		                # install SysV-style init support (auto|yes|no)
DIR_SYSVINIT="/etc/rc.d"                # location of SysV-style init script
DIR_SYSVINITSTART="/etc/rc.d"	        # location of SysV-style start script
DIR_SYSVINITSTOP="/etc/rc.d"	        # location of SysV-style stop script
NAME_SYSVINITSTART="rc.hylafax"	        # name of SysV-style start script
NAME_SYSVINITSTOP="rc.hylafax"	        # name of SysV-style stop script
FAXQ_SERVER=yes		                # init script starts faxq
HFAXD_SERVER=yes		        # init script starts hfaxd
HFAXD_SNPP_SERVER=no		        # don't start paging protocol

# SVR4 packaging stuff
#PKG_ARCH=				# ARCH variable in pkginfo file
#PKG_EMAIL=someone@somehost.somedomain	# EMAIL variable in pkginfo file
#PKG_VENDOR="Your Name Here"		# VENDOR variable in pkginfo file
#

#
# Parameters used when building the software.
#
# Note that configure has several ENVOPTS built into it that are
# set according to the target.  This is done to help naive folks.
#
# Beware of changing the INSTALL definition; you *must* have an
# install script that emulates the Silicon Graphics install program!
#
#AR="/bin/ar"				# pathname of suitable ar program
#AROPTS="rc"				# options to ar for creating archive
#CC="gcc"				# name/pathname of C compiler
#CXX="gcc"				# name/pathname of C++ compiler
#CXXFILE="-x c++"			# options for proper C++ processing
#ENVOPTS="-Aa"				# options for getting ANSI C
#GCOPTS="-g"				# options to pass C compiler
#GCXXOPTS="-g"				# options to pass C++ compiler
#GENDIST="/sbin/gendist"		# pathname of SGI inst generator program
#INSTALL='${SHELL} ${PORT}/install.sh'	# SGI install program/emulator
#LIBMALLOC="auto"			# yes|no|auto configure -lmalloc use
#LIBPORT='${PORT}/libport.a'		# library with emulation code
#LIBSUN="auto"				# yes|no|auto configure -lsun use
#LLDOPTS=""				# extra link line options
#MACHDEPLIBS=""				# extra libraries for linking
#OPTIMIZER="-O"				# optimizer flags
#PORTFUNCS=""				# non-standard functions to emulate
#PROTOTYPES="-prototypes"		# C compiler options for checking function prototypes
#RANLIB=":"				# pathname of suitable ranlib program
#SHDLIBC="-lc_s"			# shared C library, if not standard
#SIGHANDLERTYPES='(void(*)(int,...))'	# types to check for signal handler
#STRIP="/bin/strip"			# strip program used by install.sh

#
# The source for the TIFF library is not required
# to build this software, but the library is required
# to link against.  If libtiff is installed in a
# non-standard location then setup LIBTIFF accordingly.
#
LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff"	# linkage convention for libtiff
TIFFINC="-I/usr/include"		# place to find tiffio.h
TIFFBIN="/usr/bin"		# where TIFF tools live

#
# The source for the ZLIB library is not required
# to build this software, but the library is required
# to link against.  If ZLIB is installed in a 
# non-standard location then setup LIBZ accordingly.
#
LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz"		# linkage convention for libz
ZLIBINC="-I/usr/include"	# place to find zlib.h

#
# The source for the POSIX regular expression package
# is not required to build this software, but the package
# is required to link against.  If the copy of the software
# that is included in this distribution is not to be used
# then set REGEX=no and supply the following definitions.
#
#LIBREGEX=""				# linkage convention for regex package
#REGEXINC="-I/usr/include"		# place to find regex.h

#
# NLS (gettext) library support is used by default if it's found
# xgettext is not required to build this software, but if you try
# and rebuild the message template catalogs, you will need it.  Some
# platforms may need extra options to link for libintl as well.
#
INTLINC="-I/usr/include"
#LIBINTL=""				# configure will try LIBINTL="-lintl"
#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po"
#MSGMERGE="msgmerge --no-wrap --sort-by-file"
#MSGFMT=msgfmt
#MSGCAT=msgcat

#
# Parameters to control various workarounds for system bugs.
#
# These parameters are normally set in configure based on
# the target system.  If they are set here, then they will
# override anything done by configure.
#
#CONFIG_OPENFIFO="O_RDONLY"		# mode to open FIFOs in server proc's
#CONFIG_FIFOBUG="yes"			# enable workaround for FIFO select bug
#CONFIG_TIOCMBISBYREF="yes"		# pass arg by reference to ioctl
#CONFIG_WINSZHACK="no"			# include extra files for TIOCWINSZ use
#CONFIG_ABORTBUG="no"			# enable workaround for abort problems
#CONFIG_NOREOPEN="yes"			# reopen tty device after toggling DTR
#CONFIG_NOSTDINDUP="yes"		# do not redirect stdout to stdin in ondelay
#CONFIG_BADEXECVPROTO="no"		# system has incorrect execv func decl
#CONFIG_BADEXECVEPROTO="no"		# system has incorrect execve func decl
#CONFIG_BADGETOPTPROTO="no"		# system has incorrect getopt func decl
#CONFIG_SOCKARGLENTYPE="unsigned long"	# call-by-ref arg type for socket funcs
#CONFIG_BADSELECTPROTO="no"		# system has way old select func decl
#CONFIG_MAXGID="5999"			# maximum permissable GID
#CONFIG_OSFCNH="auto"			# control inclusion of <osfcn.h>

#
# Dynamic Shared Object (DSO) support.
#
# Beware that adding new support for DSOs may require some
# modifications to the */Makefile.dso files.
#
#DSOSUF="so"				# DSO filename suffix
#DSODELAY="-delay_load"			# DSO option for delayed loading
#DSOOPTS="-shared -rdata_shared"	# options for building DSOs

#
# Makefile construction parameters.
#
# These should not normally be set; configure will
# deduce the appropriate syntax to use for includes.
#
#MAKECXXOVERRIDE="=.C"			# make override stuff for SunPRO C++
#MAKEDEPINCLUDE="include"		# make include for dependency files
#MAKEDSOINCLUDE="#"			# make include for DSO support
#MAKEINCLUDE=".include"			# make include syntax
#MAKELQUOTE="<"				# make include syntax
#MAKERQUOTE=">"				# make include syntax
#SETMAKE='MAKE	= ${MAKE}'		# define if make does not setup $MAKE
#MKDEPCOPTS=""				# C compiler opts to supply w/ -M
#MKDEPCXXOPTS=""			# C++ compiler opts to supply w/ -M

#
# General system stuff used by the distribution.
#
# Beware of setting these as configure selects several programs
# based on whether or not they are capable of processing scripts
# included in the distribution (e.g AWK and SCRIPT_SH, SED).
#
#AWK="/bin/awk"				# pathname of suitable awk program
#CAT="/bin/cat"				# pathname of suitable cat program
#CHGRP="/etc/chgrp"			# pathname of suitable chgrp program
#CHMOD="/etc/chmod"			# pathname of suitable chmod program
#CHOWN="/etc/chown"			# pathname of suitable chown program
#CMP="/bin/cmp"				# pathname of suitable cmp program
#COL="/bin/col"				# pathname of suitable col program
#CP="/bin/cp"				# pathname of suitable cp program
#ECHO="/bin/echo"			# pathname of suitable echo program
#GREP="/bin/grep"			# pathname of suitable grep program
#LN="/bin/ln"				# pathname of suitable ln program
#LN_S="-s"				# option to ${LN} to create symlink
#MAN="/usr/bin/man"			# pathname of suitable man program
MKDIR="/bin/mkdir -p"			# pathname of suitable mkdir program
#MKFIFO="/bin/mkfifo"			# pathname of suitable mkfifo program
#MV="/bin/mv"				# pathname of suitable mv program
#MV_F="-f"				# option to ${MV} to force operation
#RMCMD="/bin/rm"			# pathname of suitable rm program
#SED="/bin/sed"				# pathname of suitable sed program
#SCRIPT_SH="/bin/sh"			# pathname of suitable shell
#SORT="/bin/sort"			# pathname of suitable sort program