slackbuilds_ponce/office/texlive/texlive.SlackBuild

#!/bin/sh

# TeXLive build script for Slackware

# Copyright 2009, 2010  Robby Workman, Northport, AL, USA
# Copyright 2009  Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
#
#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# URL: ftp://tug.org/historic/systems/texlive/2009/

PRGNAM=texlive
VERSION=20091107
BUILD=${BUILD:-3}
TAG=${TAG:-_SBo}

SOURCE_VERS=$VERSION
TEXMF_VERS=$VERSION
EXTRA_VERS=$VERSION

TEXI2HTML=1.82		# texi2html version - http://www.nongnu.org/texi2html/

# Automatically determine the architecture we're building on:
if [ -z "$ARCH" ]; then
  case "$( uname -m )" in
    i?86) export ARCH=i486 ;;
    arm*) export ARCH=arm ;;
    # Unless $ARCH is already set, use uname -m for all other archs:
       *) export ARCH=$( uname -m ) ;;
  esac
fi

CWD=$(pwd)
TMP=${TMP:-/tmp/SBo}
PKG=$TMP/package-texlive
OUTPUT=${OUTPUT:-/tmp}

if [ "$ARCH" = "i486" ]; then
  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "i686" ]; then
  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fPIC"
  LIBDIRSUFFIX="64"
else
  SLKCFLAGS="-O2"
  LIBDIRSUFFIX=""
fi

set -e

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $TMP
rm -rf texlive-$SOURCE_VERS-source
tar xvf $CWD/texlive-$SOURCE_VERS-source.tar.xz
cd texlive-$SOURCE_VERS-source
chown -R root:root .
chmod -R a-s .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

# etex is something for eclipse
# Building with --disable-xindy as it requires libffcall
# "kpsewhich -var-value=SELFAUTOPARENT" strips two trailing directories 
#   from the location of the binaries, and this value is used by many
#   things in TeXLive (including tlmgr); therefore, it seems best to just
#   "go with the flow" and use "--enable-multiplatform" so the symlinks
#   that are automatically created will be correct...
# Building with "--without-system-xpdf" because poppler API changes too often
TL_BUILD_ENV="CFLAGS=\"$SLKCFLAGS\" CXXFLAGS=\"$SLKCFLAGS\"" \
TL_CONFIGURE_ARGS="\
  --enable-multiplatform \
  --with-tex-banner='TeX Live 2009/Slackware (unofficial)' \
  --disable-native-texlive-build \
  --disable-static \
  --enable-ipc \
  --with-x \
  --without-etex \
  --disable-xindy \
  --without-system-xpdf \
  --with-system-ncurses \
  --with-system-zlib \
  --with-system-pnglib \
  --with-system-t1lib \
  --with-system-gd \
  --with-system-freetype2 \
  --build=$ARCH-slackware-linux" \
./Build

mkdir -p $PKG/usr/share/texmf/bin
mv inst/bin/${ARCH}-slackware-linux-gnu/* $PKG/usr/share/texmf/bin

# Install the README file while we're still here
mkdir -p $PKG/usr/doc/texlive-$VERSION
cp -a README $PKG/usr/doc/texlive-$VERSION

# Now let's install the tlmgr stuff
cd $TMP
rm -rf texlive-$EXTRA_VERS-extra
tar xvf $CWD/texlive-$EXTRA_VERS-extra.tar.xz
cd texlive-$EXTRA_VERS-extra
chown -R root:root .
chmod -R a-s .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

mkdir -p $PKG/usr/doc/texlive-$VERSION/tlpkg
cp -a tlpkg $PKG/usr/share/
cd $TMP/texlive-$EXTRA_VERS-extra
  cp -a \
    readme-txt.dir/* readme-html.dir/* README* LICENSE* doc.html \
    $PKG/usr/doc/texlive-$VERSION/tlpkg
  cat $CWD/README.tlpkg > $PKG/usr/doc/texlive-$VERSION/tlpkg/README.SLACKWARE
cd -

# and now we'll install the texmf stuff
cd $TMP
rm -rf texlive-$TEXMF_VERS-texmf
tar xvf $CWD/texlive-$TEXMF_VERS-texmf.tar.xz
cd texlive-$TEXMF_VERS-texmf
chown -R root:root .
chmod -R a-s .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;

mkdir -p $PKG/usr/share/{texmf,texmf-dist}
mv texmf-dist/* $PKG/usr/share/texmf-dist
mv texmf/* $PKG/usr/share/texmf

# Now let's add texi2hmtl - http://www.nongnu.org/texi2html/
cd $TMP
rm -rf texi2html-$TEXI2HTML
tar xvf $CWD/texi2html-$TEXI2HTML.tar.bz2
cd texi2html-$TEXI2HTML
chown -R root:root .
chmod -R a-s .
find . \
  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
  -exec chmod 755 {} \; -o \
  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
  -exec chmod 644 {} \;
CFLAGS="$SLKCFLAGS" \
./configure \
  --prefix=/usr \
  --bindir=/usr/share/texmf/bin \
  --mandir=/usr/share/texmf/doc/man \
  --infodir=/usr/info \
  --build=$ARCH-slackware-linux
make
make install DESTDIR=$PKG
mkdir -p $PKG/usr/doc/texlive-$VERSION/texi2html-$TEXI2HTML
cp -a \
  AUTHORS COPYING NEWS README TODO \
    $PKG/usr/doc/texlive-$VERSION/texi2html-$TEXI2HTML

# Now add epstopdf
mkdir -p $PKG/usr/doc/texlive-$VERSION/eps2pdf
cat $CWD/epstopdf/epstopdf.pl > $PKG/usr/share/texmf/bin/epstopdf
cat $CWD/epstopdf/epstopdf.1 > $PKG/usr/share/texmf/doc/man/man1/epstopdf.1
cat $CWD/epstopdf/epstopdf.pdf > $PKG/usr/doc/texlive-$VERSION/eps2pdf/epstopdf.pdf
cat $CWD/epstopdf/README > $PKG/usr/doc/texlive-$VERSION/eps2pdf/README
chmod 0755 $PKG/usr/share/texmf/bin/epstopdf

# Compress man pages
cd $PKG/usr/share/texmf/doc/man || exit 1
  find . -type f -name "Makefile" -exec rm -f {} \;
  find . -type f -name "*.pdf" -exec rm -f {} \;
  find . -type f -exec gzip -9 {} \;
  for i in $(find . -type l) ; do ln -s $(readlink $i).gz $i.gz ; rm $i ; done
cd -

# Handle the GNU info pages
cd $PKG/usr/info
  mv $PKG/usr/share/texmf/doc/info/* .
  rm -rf $PKG/usr/share/texmf/doc/info
  rm -f dir
  gzip -9 *
cd -

# Add profile scripts
mkdir -p $PKG/etc/profile.d
cat $CWD/profile.d/texlive.sh > $PKG/etc/profile.d/texlive.sh
cat $CWD/profile.d/texlive.csh > $PKG/etc/profile.d/texlive.csh
chmod 0755 $PKG/etc/profile.d/*

mkdir -p $PKG/install
cat $CWD/doinst.sh > $PKG/install/doinst.sh
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -p -l y -c n $OUTPUT/texlive-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

# Ignore this - it's for reference purposes  :-)  -RW
# If we turn off --enable-multiplatform and place the
# binaries only one folder deeper than texmf{,-dist}
# we should have our own configuration.
#cat > $PKG/usr/share/texmf.cnf <<EOF
#% \$SELFAUTODIR will be /usr/share
#TEXMFMAIN = \$SELFAUTODIR/texmf
#TEXMFDIST = \$SELFAUTODIR/texmf-dist
#TEXMFLOCAL = \$SELFAUTODIR/texmf-local
#TEXMFSYSVAR = \$SELFAUTODIR/texmf-var
#TEXMFSYSCONFIG = \$SELFAUTODIR/texmf-config
#EOF