mame/nl_examples/opamp.c
couriersud c8c7e9a770 Fix timing issue in CD4538. Add "pow" (power) to the function model.
Minor documentation updates. Slight improvement of gorilla sound. (nw)
2017-01-12 23:20:22 +01:00

187 lines
3.6 KiB
C

// license:GPL-2.0+
// copyright-holders:Couriersud
/*
* opamp.c
*
*/
#include "netlist/devices/net_lib.h"
NETLIST_START(main)
/* Standard stuff */
CLOCK(clk, 1000) // 1000 Hz
SOLVER(Solver, 480000)
PARAM(Solver.ACCURACY, 1e-10)
PARAM(Solver.NR_LOOPS, 30000 )
//PARAM(Solver.CONVERG, 1.0)
PARAM(Solver.GS_LOOPS, 30)
// Tie up +5 to opamps thought it's not currently needed
// Stay compatible
ANALOG_INPUT(V5, 5)
NET_C(op.VCC, V5)
NET_C(op1.VCC, V5)
/* Opamp wired as impedance changer */
SUBMODEL(opamp, op)
NET_C(op.GND, GND)
NET_C(op.PLUS, clk)
NET_C(op.MINUS, op.OUT)
SUBMODEL(opamp, op1)
/* Wired as inverting amplifier connected to output of first opamp */
RES(R1, 100000)
RES(R2, 200000)
NET_C(op1.GND, GND)
NET_C(op1.PLUS, GND)
NET_C(op1.MINUS, R2.2)
NET_C(op1.MINUS, R1.2)
NET_C(op.OUT, R1.1)
NET_C(op1.OUT, R2.1)
RES(RL, 1000)
NET_C(RL.2, GND)
NET_C(RL.1, op1.OUT)
LOG(logX, op1.OUT)
LOG(logY, clk)
NETLIST_END()
NETLIST_START(opamp)
/* Opamp model from
*
* http://www.ecircuitcenter.com/Circuits/opmodel1/opmodel1.htm
*
* Bandwidth 10Mhz
*
*/
/* Terminal definitions for calling netlists */
ALIAS(PLUS, G1.IP) // Positive input
ALIAS(MINUS, G1.IN) // Negative input
ALIAS(OUT, EBUF.OP) // Opamp output ...
ALIAS(GND, EBUF.ON) // GND terminal
ALIAS(VCC, DUMMY.I) // VCC terminal
DUMMY_INPUT(DUMMY)
/* The opamp model */
LVCCS(G1)
PARAM(G1.G, 0.0021)
PARAM(G1.CURLIM, 0.002)
RES(RP1, 1e7)
CAP(CP1, 0.00333e-6)
VCVS(EBUF)
PARAM(EBUF.RO, 50)
PARAM(EBUF.G, 1)
// NET_C(EBUF.ON, GND)
NET_C(G1.ON, GND)
NET_C(RP1.2, GND)
NET_C(CP1.2, GND)
NET_C(EBUF.IN, GND)
NET_C(RP1.1, G1.OP)
NET_C(CP1.1, RP1.1)
NET_C(EBUF.IP, RP1.1)
NETLIST_END()
NETLIST_START(opamp_mod)
/* Opamp model from
*
* http://www.ecircuitcenter.com/Circuits/opmodel1/opmodel1.htm
*
* MB3614 Unit Gain frequency is about 500 kHz and the first pole frequency
* about 5 Hz. We have to keep the Unity Gain Frequency below our sampling
* frequency of 24 Khz.
*
* Simple Opamp Model Calculation
*
* First Pole Frequency 5 Hz
* Unity Gain Frequency 11,000 Hz
* RP 100,000 Ohm
* DC Gain / Aol 2200
* CP 0.318 uF
* KG 0.022
*
*/
/* Terminal definitions for calling netlists */
ALIAS(PLUS, G1.IP) // Positive input
ALIAS(MINUS, G1.IN) // Negative input
ALIAS(OUT, EBUF.OP) // Opamp output ...
AFUNC(fUH, 1, "A0 1.2 -")
AFUNC(fUL, 1, "A0 1.2 +")
ALIAS(VCC, fUH.A0) // VCC terminal
ALIAS(GND, fUL.A0) // VGND terminal
AFUNC(fVREF, 2, "A0 A1 + 0.5 *")
NET_C(fUH.A0, fVREF.A0)
NET_C(fUL.A0, fVREF.A1)
NET_C(EBUF.ON, fVREF)
/* The opamp model */
LVCCS(G1)
PARAM(G1.RI, RES_K(1000))
#if 0
PARAM(G1.G, 0.0022)
RES(RP1, 1e6)
CAP(CP1, 0.0318e-6)
#else
PARAM(G1.G, 0.002)
PARAM(G1.CURLIM, 0.002)
RES(RP1, 9.5e6)
CAP(CP1, 0.0033e-6)
#endif
VCVS(EBUF)
PARAM(EBUF.RO, 50)
PARAM(EBUF.G, 1)
NET_C(G1.ON, fVREF)
NET_C(RP1.2, fVREF)
NET_C(CP1.2, fVREF)
NET_C(EBUF.IN, fVREF)
NET_C(RP1.1, G1.OP)
NET_C(CP1.1, RP1.1)
DIODE(DP,"D(IS=1e-15 N=1)")
DIODE(DN,"D(IS=1e-15 N=1)")
#if 1
NET_C(DP.K, fUH.Q)
NET_C(fUL.Q, DN.A)
NET_C(DP.A, DN.K, RP1.1)
#else
/*
* This doesn't add any performance by decreasing iteration loops.
* To the contrary, it significantly decreases iterations
*/
RES(RH1, 0.1)
RES(RL1, 0.1)
NET_C(DP.K, RH1.1)
NET_C(RH1.2, fUH.Q)
NET_C(fUL.Q, RL1.1)
NET_C(RL1.2, DN.A)
NET_C(DP.A, DN.K, RP1.1)
#endif
NET_C(EBUF.IP, RP1.1)
NETLIST_END()