hp-saturn/saturn_hp48gx_rom.v
2019-03-03 10:08:26 +01:00

185 lines
5.6 KiB
Verilog

/*
(c) Raphaël Jacquot 2019
This file is part of hp_saturn.
hp_saturn is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
any later version.
hp_saturn is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <https://www.gnu.org/licenses/>.
*/
`default_nettype none
`ifdef SIM
`define ROMBITS 20
`else
`define ROMBITS 13
`endif
`include "saturn_def_buscmd.v"
module saturn_hp48gx_rom (
i_clk,
i_reset,
i_phase,
i_cycle_ctr,
i_bus_clk_en,
i_bus_is_data,
o_bus_nibble_out,
i_bus_nibble_in
);
input wire [0:0] i_clk;
input wire [0:0] i_reset;
input wire [1:0] i_phase;
input wire [31:0] i_cycle_ctr;
input wire [0:0] i_bus_clk_en;
input wire [0:0] i_bus_is_data;
output reg [3:0] o_bus_nibble_out;
input wire [3:0] i_bus_nibble_in;
reg [3:0] rom_data[0:(2**`ROMBITS)-1];
initial $readmemh("rom-gx-r.hex", rom_data, 0, (2**`ROMBITS)-1);
reg [3:0] last_cmd;
reg [2:0] addr_pos_ctr;
reg [19:0] local_pc;
reg [19:0] local_dp;
initial begin
o_bus_nibble_out = 4'b0;
last_cmd = 4'b0;
addr_pos_ctr = 3'b0;
local_pc = 20'b0;
local_dp = 20'b0;
end
/*
* special cases for reading the rom
*/
wire [0:0] do_pc_read;
wire [0:0] do_dp_read;
wire [0:0] do_read;
assign do_pc_read = (last_cmd == `BUSCMD_PC_READ);
assign do_dp_read = (last_cmd == `BUSCMD_DP_READ);
assign do_read = do_pc_read || do_dp_read;
wire [`ROMBITS-1:0] access_pointer;
assign access_pointer = do_pc_read?local_pc[`ROMBITS-1:0]:local_dp[`ROMBITS-1:0];
/* async version ? */
// always @(*) begin
// o_bus_nibble_out = 4'b0;
// if (i_bus_clk_en && i_bus_is_data && do_read)
// o_bus_nibble_out = rom_data[access_pointer];
// end
always @(posedge i_clk) begin
if (i_bus_clk_en && i_bus_is_data && do_read)
o_bus_nibble_out <= rom_data[access_pointer];
end
/*
* general case
*/
always @(posedge i_clk) begin
if (i_bus_clk_en) begin
if (i_bus_is_data) begin
/* do things with the bits...*/
case (last_cmd)
`BUSCMD_PC_READ:
begin
// o_bus_nibble_out <= rom_data[local_pc[`ROMBITS-1:0]];
local_pc <= local_pc + 1;
end
`BUSCMD_DP_READ:
begin
// o_bus_nibble_out <= rom_data[local_dp[`ROMBITS-1:0]];
local_dp <= local_dp + 1;
end
`BUSCMD_PC_WRITE: local_pc <= local_pc + 1;
`BUSCMD_DP_WRITE: local_dp <= local_dp + 1;
`BUSCMD_LOAD_PC:
begin
local_pc[addr_pos_ctr*4+:4] <= i_bus_nibble_in;
addr_pos_ctr <= addr_pos_ctr + 1;
end
`BUSCMD_LOAD_DP:
begin
local_dp[addr_pos_ctr*4+:4] <= i_bus_nibble_in;
addr_pos_ctr <= addr_pos_ctr + 1;
end
default: begin end
endcase
/* auto switch to pc read / dp read */
if (addr_pos_ctr == 4) begin
case (last_cmd)
`BUSCMD_LOAD_PC: last_cmd <= `BUSCMD_PC_READ;
`BUSCMD_LOAD_DP: last_cmd <= `BUSCMD_DP_READ;
default: begin end
endcase
end
`ifdef SIM
$write("ROM-GX-R %0d: [%d] ", i_phase, i_cycle_ctr);
case (last_cmd)
`BUSCMD_PC_READ: $write("PC_READ <= rom[%5h]:%h", local_pc, rom_data[local_pc]);
`BUSCMD_DP_READ: $write("DP_READ <= rom[%5h]:%h", local_dp, rom_data[local_dp]);
`BUSCMD_LOAD_PC: $write("LOAD_PC - pc %5h, %h pos %0d", local_pc, i_bus_nibble_in, addr_pos_ctr);
`BUSCMD_LOAD_DP: $write("LOAD_PC - pc %5h, %h pos %0d", local_pc, i_bus_nibble_in, addr_pos_ctr);
default: $write("last_command %h nibble %h - UNHANDLED", last_cmd, i_bus_nibble_in);
endcase
if (addr_pos_ctr == 4) begin
case (last_cmd)
`BUSCMD_LOAD_PC: $write(" auto switch to PC_READ");
`BUSCMD_LOAD_DP: $write(" auto switch to DP_READ");
default: begin end
endcase
end
$write("\n");
`endif
end else begin
last_cmd <= i_bus_nibble_in;
if ((i_bus_nibble_in == `BUSCMD_LOAD_PC) || (i_bus_nibble_in == `BUSCMD_LOAD_DP))
addr_pos_ctr <= 0;
`ifdef SIM
$write("ROM-GX-R %0d: [%d] ", i_phase, i_cycle_ctr);
case (i_bus_nibble_in)
`BUSCMD_LOAD_PC: $write("LOAD_PC");
`BUSCMD_LOAD_DP: $write("LOAD_DP");
`BUSCMD_CONFIGURE: $write("CONFIGURE");
`BUSCMD_RESET: $write("RESET");
default: begin end
endcase
$write("\n");
`endif
end
end
if (i_reset) begin
last_cmd <= 4'b0;
addr_pos_ctr <= 3'b0;
local_pc <= 20'b0;
local_dp <= 20'b0;
end
end
endmodule