#!/bin/bash # --- TODO # * DONE remove dependance on debian based host # ** DONE use linaro toolchain # https://launchpad.net/linaro-toolchain-binaries/trunk/ # * DOING clean up script # * TODO package the kernel in a real slackware package # * TODO switch userland to hard-float binaries # * TODO build rootfs from slackwarearm-current # ftp://ftp.arm.slackware.com/slackwarearm/slackwarearm-devtools/minirootfs/scripts/ if [ ! -x /usr/bin/mkimage ]; then echo "Missing u-boot tools" echo "Please install them from http://www.slackware.com/~alien/slackbuilds/u-boot-tools/" exit 1 fi # --- Configuration ------------------------------------------------------------- #change to your needs IMG_NAME=${IMG_NAME:-"SlackwareARM_cubitruck"} VERSION=${VERSION:-0.2} DEST_LANG=${DEST_LANG:-"en_US"} DEST_LANGUAGE=${DEST_LANGUAGE:-"us"} COMPILE=${COMPILE:-"true"} DEST=${DEST:-~/cubieslack} DISPLAY=${DISPLAY:-3} # "3:hdmi; 4:vga" IMAGE_SIZE_MB=${IMAGE_SIZE_MB:-2000} SLACKWARE_VERSION=${SLACKWARE_VERSION:-14.1} ROOTFS_VERSION=${ROOTFS_VERSION:-04Nov13} CONFIG_HZ=${CONFIG_HZ:-300HZ} # 250HZ, 300HZ or 1000HZ # --- Script -------------------------------------------------------------------- SRC=$(pwd) CWD=$(pwd) set -e mkdir -p $DEST #Requires root .. if [ "$UID" -ne 0 ] then echo "Please run as root" exitssid=CUBIE interface=wlan0 hw_mode=g channel=1 bridge=br0 logger_syslog=0 logger_syslog_level=0 wmm_enabled=0 wpa=2 preamble=1 wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 fi echo "Building Cubietruck-Slackware in $DEST from $SRC" sleep 3 #-------------------------------------------------------------------------------- # Downloading necessary files for building - aka Toolchain #-------------------------------------------------------------------------------- echo "------ Downloading cross-compiler" #Read this for further information if you run into problems with gcc compiler #http://linux-sunxi.org/Toolchain wget -c https://launchpadlibrarian.net/155358238/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.xz tar xf gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.xz CROSS_COMPILE=$PWD/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf- #-------------------------------------------------------------------------------- # Preparing output / destination files #-------------------------------------------------------------------------------- echo "------ Fetching files from github" mkdir -p $DEST/output cp output/uEnv.txt $DEST/output # # u-boot tools # if [ -d "$DEST/u-boot" ]; then # (cd $DEST/u-boot; # git pull) # else # git clone git://git.denx.de/u-boot.git $DEST/u-boot # fi # Boot loader if [ -d "$DEST/u-boot-sunxi" ] then cd $DEST/u-boot-sunxi ; git pull; cd $SRC else git clone https://github.com/cubieboard/u-boot-sunxi $DEST/u-boot-sunxi # Applying Patch for 2gb memory patch -f $DEST/u-boot-sunxi/include/configs/sunxi-common.h < $SRC/patch/memory.patch || true fi # Allwinner tools if [ -d "$DEST/sunxi-tools" ] then cd $DEST/sunxi-tools; git pull; cd $SRC else git clone https://github.com/linux-sunxi/sunxi-tools.git $DEST/sunxi-tools fi # Hardware configurations if [ -d "$DEST/cubie_configs" ] then cd $DEST/cubie_configs; git pull; cd $SRC else git clone https://github.com/cubieboard/cubie_configs $DEST/cubie_configs # Applying Patch for high load. Could cause troubles with USB OTG port sed -e 's/usb_detect_type = 1/usb_detect_type = 0/g' $DEST/cubie_configs/sysconfig/linux/cubietruck.fex > $DEST/cubie_configs/sysconfig/linux/ct.fex # Prepare fex files for VGA & HDMI sed -e 's/screen0_output_type.*/screen0_output_type = 3/g' $DEST/cubie_configs/sysconfig/linux/ct.fex > $DEST/cubie_configs/sysconfig/linux/ct-hdmi.fex sed -e 's/screen0_output_type.*/screen0_output_type = 4/g' $DEST/cubie_configs/sysconfig/linux/ct.fex > $DEST/cubie_configs/sysconfig/linux/ct-vga.fex fi # Patwood's kernel 3.4.75+ if [ -d "$DEST/linux-sunxi" ] then cd $DEST/linux-sunxi; git pull -f; cd $SRC else git clone https://github.com/patrickhwood/linux-sunxi $DEST/linux-sunxi ###PATCH kernel CONFIG_HZ, Arm dfault is hardcoded 100hz (10ms latency!). For mulitimedia and desktop a higher frequency is recomended. test -f $SRC/patch/$CONFIG_HZ.patch && patch -f $DEST/linux-sunxi/arch/arm/Kconfig < $SRC/patch/$CONFIG_HZ.patch fi #-------------------------------------------------------------------------------- # Compiling everything #-------------------------------------------------------------------------------- echo "------ Compiling kernel boot loaderb" # Copying Kernel config cp $SRC/config/kernel.config $DEST/linux-sunxi/ # echo "------ Compiling mkimage" # cd $DEST/u-boot # touch include/autoconf.mk # touch include/autoconf.mk.dep # mkdir include/generated # touch include/generated/generic-asm-offsets.h # touch lib/asm-offsets.s # touch {arch/arm/cpu/arm926ejs,examples/standalone,tools,tools/env}/.depend # make tools HOSTCC="gcc $SLKCFLAGS" HOSTSTRIP=/bin/true CROSS_COMPILE="" # export PATH=$PATH:$(pwd)/tools/ echo "------ Compiling boot loader" cd $DEST/u-boot-sunxi make clean make -j2 'cubietruck' CROSS_COMPILE=$CROSS_COMPILE echo "------ Compiling sunxi tools" cd $DEST/sunxi-tools make clean make fex2bin make bin2fex mkdir -p $CWD/bin/ cp fex2bin bin2fex $CWD/bin/ # hardware configuration $CWD/bin/fex2bin $DEST/cubie_configs/sysconfig/linux/ct-vga.fex $DEST/output/script-vga.bin $CWD/bin/fex2bin $DEST/cubie_configs/sysconfig/linux/ct-hdmi.fex $DEST/output/script-hdmi.bin echo "------ Compiling kernel" if [ "$COMPILE" = "true" ]; then # kernel image echo "------ Compiling kernel" cd $DEST/linux-sunxi make clean # Adding wlan firmware to kernel source cd $DEST/linux-sunxi/firmware; unzip -o $SRC/bin/ap6210.zip cd $DEST/linux-sunxi make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE sun7i_defconfig # get proven config cp $DEST/linux-sunxi/kernel.config $DEST/linux-sunxi/.config make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE uImage modules make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE INSTALL_MOD_PATH=output modules_install make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE INSTALL_HDR_PATH=output headers_install fi #-------------------------------------------------------------------------------- # Creating SD Images #-------------------------------------------------------------------------------- echo "------ Creating SD Images" cd $DEST/output # create image and mount image to next free loop device dd if=/dev/zero of=${IMG_NAME}-${VERSION}_rootfs_SD.raw bs=1M count=$IMAGE_SIZE_MB LOOP0=$(losetup -f) losetup $LOOP0 slackware_rootfs.raw echo "------ Partitionning and mounting filesystem" # make image bootable dd if=$DEST/u-boot-sunxi/u-boot-sunxi-with-spl.bin of=$LOOP0 bs=1024 seek=8 # create one partition starting at 2048 which is default (echo n; echo p; echo 1; echo; echo; echo w) | fdisk $LOOP0 >> /dev/null || true # just to make sure partprobe $LOOP0 LOOP1=$(losetup -f) # 2048 (start) x 512 (block size) = where to mount partition losetup -o 1048576 $LOOP1 $LOOP0 # create filesystem mkfs.ext4 $LOOP1 # create mount point and mount image mkdir -p $DEST/output/sdcard/ mount $LOOP1 $DEST/output/sdcard/ echo "------ Get basic Slackware System" cd $DEST/output/sdcard/ wget -c ftp://ftp.arm.slackware.com/slackwarearm/slackwarearm-devtools/minirootfs/roots/slack-$SLACKWARE_VERSION-miniroot_$ROOTFS_VERSION.tar.xz tar xf slack-$SLACKWARE_VERSION-miniroot_$ROOTFS_VERSION.tar.xz sync rm slack-$SLACKWARE_VERSION-miniroot_$ROOTFS_VERSION.tar.xz cat > $DEST/output/sdcard/etc/motd < $DEST/output/sdcard/etc/rc.d/rc.local # scripts for autoresize at first boot from cubian cp $SRC/scripts/resize2fs-arch.sh $DEST/output/sdcard/root/resize2fs-root.sh # make it executable chmod +x $DEST/output/sdcard/root/resize2fs-root.sh # and startable on boot just execute it once not on every boot!!! #echo cubian-resize2fs > $DEST/output/sdcard/etc/rc.conf # script to install to NAND cp $SRC/scripts/nand-install.sh $DEST/output/sdcard/root cp $SRC/bin/nand1-boot-cubietruck-arch.tgz $DEST/output/sdcard/root # install and configure locales #echo LANG='$DEST_LANG'.UTF-8 > $DEST/output/sdcard/etc/default.conf #echo KEYMAP=us > $DEST/output/sdcard/etc/vconsole.conf #use this command when System runs # sudo timedatectl set-timezone Zone/SubZone # when setup preferred gui like openbox then use loadkeys de # i recommend you to change this urgently + add a proper user for the System!!! # default passwort for user "root" is "root" #echo 1234;echo 1234; | passwd root # set hostname echo darkstar > $DEST/output/sdcard/etc/HOSTNAME ### declare root partition in fstab echo '/dev/mmcblk0p1 / ext4 defaults 1 1' >> $DEST/output/sdcard/etc/fstab ### mount /tmp as tmpfs echo 'tmpfs /tmp tmpfs defaults,nosuid,size=30% 0 0' >> $DEST/output/sdcard/etc/fstab ### Optional /var/log #echo 'tmpfs /var/log tmpfs defaults,nosuid 0 0' >> $DEST/output/sdcard/etc/fstab ##disable IPV6 and reduce timeout from 30s to 5 on dhcp daemon #echo "ipv4only" >> /etc/dhcpcd.conf #echo "noipv6rs" >> /etc/dhcpcd.conf echo "timeout 5" >> /etc/dhcpcd.conf # load modules you may load them per sysctl cat >> $DEST/output/sdcard/etc/rc.d/rc.modules < $DEST/output/sdcard/etc/netctl/interfaces/eth0 < $DEST/output/sdcard/etc/netctl/wlan0 <> $DEST/output/sdcard/etc/network/interfaces.hostapd #auto lo br0 #iface lo inet loopback #allow-hotplug eth0 #iface eth0 inet manual #allow-hotplug wlan0 #iface wlan0 inet manual #iface br0 inet dhcp #bridge_ports eth0 wlan0 #hwaddress ether # will be added at first boot #EOT # enable serial console (Debian/sysvinit way) #echo T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100 >> $DEST/output/sdcard/etc/inittab #remove the preconfigured boot from the image and use the one we want rm -rf $DEST/output/sdcard/boot/ mkdir -p $DEST/output/sdcard/boot/ cp $DEST/output/uEnv.txt $DEST/output/sdcard/boot/ cp $DEST/linux-sunxi/arch/arm/boot/uImage $DEST/output/sdcard/boot/ # copy proper bin file if [ $DISPLAY = 4 ]; then cp $DEST/output/script-vga.bin $DEST/output/sdcard/boot/script.bin else cp $DEST/output/script-hdmi.bin $DEST/output/sdcard/boot/script.bin fi cp -R $DEST/linux-sunxi/output/lib/modules $DEST/output/sdcard/lib/ cp -R $DEST/linux-sunxi/output/lib/firmware/ $DEST/output/sdcard/lib/ # USB redirector tools http://www.incentivespro.com #cd $DEST #wget http://www.incentivespro.com/usb-redirector-linux-arm-eabi.tar.gz #tar xvfz usb-redirector-linux-arm-eabi.tar.gz #rm usb-redirector-linux-arm-eabi.tar.gz #cd $DEST/usb-redirector-linux-arm-eabi/files/modules/src/tusbd #make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE KERNELDIR=$DEST/linux-sunxi/ # configure USB redirector #sed -e 's/%INSTALLDIR_TAG%/\/usr\/local/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 #sed -e 's/%PIDFILE_TAG%/\/var\/run\/usbsrvd.pid/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd #sed -e 's/%STUBNAME_TAG%/tusbd/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 #sed -e 's/%DAEMONNAME_TAG%/usbsrvd/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd #chmod +x $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd # copy to root #cp $DEST/usb-redirector-linux-arm-eabi/files/usb* $DEST/output/sdcard/usr/local/bin/ #cp $DEST/usb-redirector-linux-arm-eabi/files/modules/src/tusbd/tusbd.ko $DEST/output/sdcard/usr/local/bin/ #cp $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd $DEST/output/sdcard/etc/modules-load.d/ # started by default # hostapd from testing binary replace. # cd $DEST/output/sdcard/usr/sbin/ # tar xvfz $SRC/bin/hostapd21.tgz # cp $SRC/config/hostapd.conf $DEST/output/sdcard/etc/ # sunxi-tools cd $DEST/sunxi-tools make clean make -j2 'fex2bin' CC=${CROSS_COMPILE}gcc make -j2 'bin2fex' CC=${CROSS_COMPILE}gcc make -j2 'nand-part' CC=${CROSS_COMPILE}gcc mkdir -p $DEST/output/sdcard/usr/bin/ cp fex2bin $DEST/output/sdcard/usr/bin/ cp bin2fex $DEST/output/sdcard/usr/bin/ cp nand-part $DEST/output/sdcard/usr/bin/ # umount images umount $DEST/output/sdcard/ losetup -d $LOOP1 losetup -d $LOOP0 sync # compress image gzip $DEST/output/*.raw