clean-up and removal of steps out of scope of strict installation

build.sh

@@ -13,6 +13,9 @@
 # * TODO organize patches by corresponding sources
 # * TODO review $CWD/scripts/resize2fs-arch.sh
 
+set -e
+
+# --- Check environment --------------------------------------------------------
 if [ ! -x /usr/bin/mkimage ]; then
     echo "Missing u-boot tools"
     echo "Please install them from http://www.slackware.com/~alien/slackbuilds/u-boot-tools/"
@@ -23,8 +26,6 @@ fi
 #change to your needs
 IMG_NAME=${IMG_NAME:-"SlackwareARM_cubitruck"}
 VERSION=${VERSION:-0.2}
-DEST_LANG=${DEST_LANG:-"en_US"}
-DEST_LANGUAGE=${DEST_LANGUAGE:-"us"}
 COMPILE=${COMPILE:-"true"}
 DEST=${DEST:-~/cubieslack}
 DISPLAY=${DISPLAY:-3}  # "3:hdmi; 4:vga"
@@ -32,17 +33,16 @@ IMAGE_SIZE_MB=${IMAGE_SIZE_MB:-2000}
 SLACKWARE_VERSION=${SLACKWARE_VERSION:-14.1}
 ROOTFS_VERSION=${ROOTFS_VERSION:-04Nov13}
 CONFIG_HZ=${CONFIG_HZ:-300HZ}  # 250HZ, 300HZ or 1000HZ
+TOOLCHAIN_VERSION=${TOOLCHAIN_VERSION:-4.8-2013.10}
+TOOLCHAIN_URL_RANDOM_NUMBER=${TOOLCHAIN_URL_RANDOM_NUMBER:-155358238}
 
 # --- Script --------------------------------------------------------------------
-SRC=$(pwd)
 CWD=$(pwd)
-set -e
 
 mkdir -p $DEST
 
 #Requires root ..
-if [ "$UID" -ne 0 ]
+if [ "$UID" -ne 0 ]; then echo "Please run as root"
-then echo "Please run as root"
      exitssid=CUBIE
      interface=wlan0
      hw_mode=g
@@ -64,7 +64,7 @@ then echo "Please run as root"
      macaddr_acl=0
 fi
 
-echo "Building Cubietruck-Slackware in $DEST from $SRC"
+echo "Building Cubietruck-Slackware in $DEST from $CWD"
 sleep 3
 
 #--------------------------------------------------------------------------------
@@ -74,48 +74,49 @@ echo "------ Downloading cross-compiler"
 #Read this for further information if you run into problems with gcc compiler
 #http://linux-sunxi.org/Toolchain
 
-wget -c https://launchpadlibrarian.net/155358238/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.xz
+wget -c https://launchpadlibrarian.net/$TOOLCHAIN_URL_RANDOM_NUMBER/gcc-linaro-arm-linux-gnueabihf-${TOOLCHAIN_VERSION}_linux.tar.xz
-tar xf gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux.tar.xz
+tar xf gcc-linaro-arm-linux-gnueabihf-${TOOLCHAIN_VERSION}_linux.tar.xz
 
-CROSS_COMPILE=$PWD/gcc-linaro-arm-linux-gnueabihf-4.8-2013.10_linux/bin/arm-linux-gnueabihf-
+CROSS_COMPILE=$PWD/gcc-linaro-arm-linux-gnueabihf-${TOOLCHAIN_VERSION}_linux/bin/arm-linux-gnueabihf-
 
 #--------------------------------------------------------------------------------
 # Preparing output / destination files
 #--------------------------------------------------------------------------------
-echo "------ Fetching files from github"
+echo "------ Clone / Pull sources and patch"
 mkdir -p $DEST/output
 cp output/uEnv.txt $DEST/output
 
 # # u-boot tools
 # if [ -d "$DEST/u-boot" ]; then
-#     (cd $DEST/u-boot;
+#     ( cd $DEST/u-boot;
-#      git pull)
+#       git pull )
 # else
 #     git clone git://git.denx.de/u-boot.git $DEST/u-boot
 # fi
 
 # Boot loader
-if [ -d "$DEST/u-boot-sunxi" ]
+if [ -d "$DEST/u-boot-sunxi" ]; then
-then
+    ( cd $DEST/u-boot-sunxi;
-    cd $DEST/u-boot-sunxi ; git pull; cd $SRC
+      git pull )
 else
     git clone https://github.com/cubieboard/u-boot-sunxi $DEST/u-boot-sunxi
+
     # Applying Patch for 2gb memory
-    patch -f $DEST/u-boot-sunxi/include/configs/sunxi-common.h < $SRC/patch/memory.patch || true
+    patch -f $DEST/u-boot-sunxi/include/configs/sunxi-common.h < $CWD/patch/memory.patch || true
 fi
 
 # Allwinner tools
-if [ -d "$DEST/sunxi-tools" ]
+if [ -d "$DEST/sunxi-tools" ]; then
-then
+    ( cd $DEST/sunxi-tools;
-    cd $DEST/sunxi-tools; git pull; cd $SRC
+      git pull )
 else
     git clone https://github.com/linux-sunxi/sunxi-tools.git $DEST/sunxi-tools
 fi
 
 # Hardware configurations
-if [ -d "$DEST/cubie_configs" ]
+if [ -d "$DEST/cubie_configs" ]; then
-then
+    ( cd $DEST/cubie_configs;
-    cd $DEST/cubie_configs; git pull; cd $SRC
+      git pull )
 else
     git clone https://github.com/cubieboard/cubie_configs $DEST/cubie_configs
 
@@ -128,14 +129,14 @@ else
 fi
 
 # Patwood's kernel 3.4.75+
-if [ -d "$DEST/linux-sunxi" ]
+if [ -d "$DEST/linux-sunxi" ]; then
-then
+    ( cd $DEST/linux-sunxi;
-    cd $DEST/linux-sunxi; git pull -f; cd $SRC
+      git pull -f )
 else
     git clone https://github.com/patrickhwood/linux-sunxi $DEST/linux-sunxi
 
     ###PATCH kernel CONFIG_HZ, Arm dfault is hardcoded 100hz (10ms latency!). For mulitimedia and desktop a higher frequency is recomended.
-    test -f $SRC/patch/$CONFIG_HZ.patch && patch -f $DEST/linux-sunxi/arch/arm/Kconfig < $SRC/patch/$CONFIG_HZ.patch
+    test -f $CWD/patch/$CONFIG_HZ.patch && patch -f $DEST/linux-sunxi/arch/arm/Kconfig < $CWD/patch/$CONFIG_HZ.patch
 fi
 
 #--------------------------------------------------------------------------------
@@ -144,7 +145,7 @@ fi
 echo "------ Compiling kernel boot loaderb"
 
 # Copying Kernel config
-cp $SRC/config/kernel.config $DEST/linux-sunxi/
+cp $CWD/config/kernel.config $DEST/linux-sunxi/
 
 # echo "------ Compiling mkimage"
 # cd $DEST/u-boot
@@ -164,9 +165,7 @@ make -j2 'cubietruck' CROSS_COMPILE=$CROSS_COMPILE
 
 echo "------ Compiling sunxi tools"
 cd $DEST/sunxi-tools
-make clean
+make clean fex2bin bin2fex
-make fex2bin
-make bin2fex
 
 mkdir -p $CWD/bin/
 cp fex2bin bin2fex $CWD/bin/
@@ -184,7 +183,7 @@ if [ "$COMPILE" = "true" ]; then
 
     # Adding wlan firmware to kernel source
     cd $DEST/linux-sunxi/firmware;
-    unzip -o $SRC/bin/ap6210.zip
+    unzip -o $CWD/bin/ap6210.zip
     cd $DEST/linux-sunxi
 
     make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE sun7i_defconfig
@@ -247,7 +246,7 @@ cat > $DEST/output/sdcard/etc/motd <<EOF
 EOF
 
 # script to turn off the LED blinking
-cp $SRC/scripts/disable_led.sh $DEST/output/sdcard/bin/disable_led.sh
+cp $CWD/scripts/disable_led.sh $DEST/output/sdcard/bin/disable_led.sh
 
 # make it executable
 chmod +x $DEST/output/sdcard/bin/disable_led.sh
@@ -255,26 +254,15 @@ chmod +x $DEST/output/sdcard/bin/disable_led.sh
 echo disable_led.sh > $DEST/output/sdcard/etc/rc.d/rc.local
 
 # scripts for autoresize at first boot from cubian
-cp $SRC/scripts/resize2fs-arch.sh $DEST/output/sdcard/root/resize2fs-root.sh
+cp $CWD/scripts/resize2fs-arch.sh $DEST/output/sdcard/root/resize2fs-root.sh
 # make it executable
 chmod +x $DEST/output/sdcard/root/resize2fs-root.sh
 # and startable on boot just execute it once not on every boot!!!
 #echo cubian-resize2fs > $DEST/output/sdcard/etc/rc.conf
 
 # script to install to NAND
-cp $SRC/scripts/nand-install.sh $DEST/output/sdcard/root
+cp $CWD/scripts/nand-install.sh $DEST/output/sdcard/root
-cp $SRC/bin/nand1-boot-cubietruck-arch.tgz $DEST/output/sdcard/root
+cp $CWD/bin/nand1-boot-cubietruck-arch.tgz $DEST/output/sdcard/root
-
-# install and configure locales
-#echo LANG='$DEST_LANG'.UTF-8 > $DEST/output/sdcard/etc/default.conf
-#echo KEYMAP=us > $DEST/output/sdcard/etc/vconsole.conf
-#use this command when System runs
-# sudo timedatectl set-timezone Zone/SubZone
-# when setup preferred gui like openbox then use loadkeys de
-
-# i recommend you to change this urgently + add a proper user for the System!!!
-# default passwort for user "root" is "root"
-#echo 1234;echo 1234; | passwd root
 
 # set hostname
 echo darkstar > $DEST/output/sdcard/etc/HOSTNAME
@@ -285,19 +273,10 @@ echo '/dev/mmcblk0p1	/	ext4	defaults		1	1' >> $DEST/output/sdcard/etc/fstab
 ### mount /tmp as tmpfs
 echo 'tmpfs	/tmp	tmpfs	defaults,nosuid,size=30%	0	0' >> $DEST/output/sdcard/etc/fstab
 
-### Optional /var/log
-#echo 'tmpfs /var/log  tmpfs   defaults,nosuid   0   0' >> $DEST/output/sdcard/etc/fstab
-
-##disable IPV6 and reduce timeout from 30s to 5 on dhcp daemon
-
-#echo "ipv4only" >> /etc/dhcpcd.conf
-#echo "noipv6rs" >> /etc/dhcpcd.conf
-echo "timeout 5" >> /etc/dhcpcd.conf
 
 
 
-
+# modules to load
-# load modules you may load them per sysctl
 cat >> $DEST/output/sdcard/etc/rc.d/rc.modules <<EOT
 #!/bin/sh
 
@@ -309,46 +288,6 @@ cat >> $DEST/output/sdcard/etc/rc.d/rc.modules <<EOT
 #/sbin/modprobe sunxi_gmac
 EOT
 
-# edit this to your personal needs/network configs take the ones from /etc/netctl/examples/ folder
-# create interfaces configuration
-#cat > $DEST/output/sdcard/etc/netctl/interfaces/eth0 <<EOT
-#auto eth0
-#allow-hotplug eth0
-#iface eth0 inet dhcp
-#        hwaddress ether #for AP use
-#
-#EOT
-
-#use wifi-menu wlan0 to configure
-#cat > $DEST/output/sdcard/etc/netctl/wlan0 <<EOT
-#auto wlan0
-#allow-hotplug wlan0
-#iface wlan0 inet dhcp
-#    wpa-ssid SSID
-#    wpa-psk xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
-# to generate proper encrypted key: wpa_passphrase yourSSID yourpassword
-
-#EOT
-
-# create interfaces if you want to have AP. /etc/modules must be: bcmdhd op_mode=2
-#cat <<EOT >> $DEST/output/sdcard/etc/network/interfaces.hostapd
-#auto lo br0
-#iface lo inet loopback
-
-#allow-hotplug eth0
-#iface eth0 inet manual
-
-#allow-hotplug wlan0
-#iface wlan0 inet manual
-
-#iface br0 inet dhcp
-#bridge_ports eth0 wlan0
-#hwaddress ether # will be added at first boot
-#EOT
-
-# enable serial console (Debian/sysvinit way)
-#echo T0:2345:respawn:/sbin/getty -L ttyS0 115200 vt100 >> $DEST/output/sdcard/etc/inittab
-
 #remove the preconfigured boot from the image and use the one we want
 rm -rf $DEST/output/sdcard/boot/
 mkdir -p $DEST/output/sdcard/boot/
@@ -365,30 +304,6 @@ fi
 cp -R $DEST/linux-sunxi/output/lib/modules $DEST/output/sdcard/lib/
 cp -R $DEST/linux-sunxi/output/lib/firmware/ $DEST/output/sdcard/lib/
 
-# USB redirector tools http://www.incentivespro.com
-#cd $DEST
-#wget http://www.incentivespro.com/usb-redirector-linux-arm-eabi.tar.gz
-#tar xvfz usb-redirector-linux-arm-eabi.tar.gz
-#rm usb-redirector-linux-arm-eabi.tar.gz
-#cd $DEST/usb-redirector-linux-arm-eabi/files/modules/src/tusbd
-#make -j2 ARCH=arm CROSS_COMPILE=$CROSS_COMPILE KERNELDIR=$DEST/linux-sunxi/
-# configure USB redirector
-#sed -e 's/%INSTALLDIR_TAG%/\/usr\/local/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1
-#sed -e 's/%PIDFILE_TAG%/\/var\/run\/usbsrvd.pid/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd
-#sed -e 's/%STUBNAME_TAG%/tusbd/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1
-#sed -e 's/%DAEMONNAME_TAG%/usbsrvd/g' $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd1 > $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd
-#chmod +x $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd
-# copy to root
-#cp $DEST/usb-redirector-linux-arm-eabi/files/usb* $DEST/output/sdcard/usr/local/bin/
-#cp $DEST/usb-redirector-linux-arm-eabi/files/modules/src/tusbd/tusbd.ko $DEST/output/sdcard/usr/local/bin/
-#cp $DEST/usb-redirector-linux-arm-eabi/files/rc.usbsrvd $DEST/output/sdcard/etc/modules-load.d/
-# started by default
-
-# hostapd from testing binary replace.
-# cd $DEST/output/sdcard/usr/sbin/
-# tar xvfz $SRC/bin/hostapd21.tgz
-# cp $SRC/config/hostapd.conf $DEST/output/sdcard/etc/
-
 # sunxi-tools
 cd $DEST/sunxi-tools
 make clean