codecov-bash runs it by default already, therefore we do not not have to
do so manually before do_codecov_gcov.
And with `do_codecov` itself, it gets disabled using `-X gcov`.
Using exit code != 1 (e.g. 2 as with "make") appears to cause Travis to
consider the build job as an error ("!"), instead of a failure ("X").
Example build: https://travis-ci.org/awesomeWM/awesome/builds/248484247
!: https://travis-ci.org/awesomeWM/awesome/jobs/248484252
Test finished successfully
There were 3 errors!
make[4]: *** [CMakeFiles/check-integration] Error 1
make[3]: *** [CMakeFiles/check-integration.dir/all] Error 2
make[2]: *** [CMakeFiles/check-integration.dir/rule] Error 2
make[1]: *** [check-integration] Error 2
make: *** [check-integration] Error 2
++return
X: https://travis-ci.org/awesomeWM/awesome/jobs/248484250
Test finished successfully
There were 3 errors!
The combination of TEST_PREV_COMMITS=1 and EMPTY_THEME_WHILE_LOADING=1
does not work. When trying to test the previous commits, the following
error happens:
error: Your local changes to the following files would be overwritten by
checkout:
lib/beautiful/init.lua
This local modification was done by EMPTY_THEME_WHILE_LOADING=1.
Signed-off-by: Uli Schlachter <psychon@znc.in>
This makes sure that the liblua.so that we built actually depends on the
libraries that it needs (libm and libdl). Previously we already tried
this, but specified "-ldl" at the beginning of the command line. Since
nothing needed this library yet, the linker just ignored it.
Signed-off-by: Uli Schlachter <psychon@znc.in>
ldoc was not installed for the DO_CHECKQA build.
This merges it with the BUILD_APIDOC build job, which is one of the
faster ones; installing ldoc into the DO_COVERAGE=coveralls would slow
that one down a lot.
This also moves the two slowest builds (with coverage reporting) to the
top, so they get started first.
Fixes https://github.com/awesomeWM/awesome/issues/1710.
Closes https://github.com/awesomeWM/awesome/pull/1716.
The entry "gtk+3.0" caused the following to happen:
Note, selecting 'libcanberra-gtk3-0-dbg' for regex 'gtk+3.0'
Note, selecting 'monodoc-gtk3.0-manual' for regex 'gtk+3.0'
Note, selecting 'libgtk3.0-cil' for regex 'gtk+3.0'
Note, selecting 'libavahi-ui-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-0-dbg' for regex 'gtk+3.0'
Note, selecting 'libseed-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libgtk3.0-cil-dev' for regex 'gtk+3.0'
Note, selecting 'libcanberra-gtk3-0' for regex 'gtk+3.0'
Note, selecting 'libinfgtk3-0.5-0' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-0' for regex 'gtk+3.0'
Note, selecting 'gir1.2-dbusmenu-gtk3-0.4' for regex 'gtk+3.0'
Note, selecting 'libwxgtk3.0-dev' for regex 'gtk+3.0'
This was clearly not intended. Fix this by using gir1.2-gtk-3.0 instead,
which is what we actually want (GObject introspection data for GTK 3).
This pretty much reverts commit 30a527fcfd.
Signed-off-by: Uli Schlachter <psychon@znc.in>
* Move table functions out of awful.util into new gears.table
* travis: Use v9999 prefix for full requests
Make sure no newly deprecated functions are used
* Move all `awful.util.table.*` calls to `gears.table.*` calls
Move table test functions from awful/util_spec to new gears/table_spec
Change awful.util.subsets call to gears.math.subsets in awful/key.lua
For loading a theme, beautiful.init() has to be called. We do not handle
dynamic changes of the theme, so if the theme is changed after something
was already queried, this change will not apply. This also means that
before the theme is loaded, nothing useful can be returned. In fact,
code that tries to access the theme during require() will never get a
useful value from beautiful, but just nils.
To catch this, one Travis build is modified so that an error is raised
if the theme is accessed before beautiful.init() was called.
Signed-off-by: Uli Schlachter <psychon@znc.in>
Currently, "everything can require everything". It's an unstructured
mess which sometimes causes problems.
This commit adds a tool that enforces a white-list of require() uses. It
uses depgraph to scan the source code and then each use of require()
that is found is checked. If any violations are found, the tool returns
a failure.
This tool is wired up to a new target "make check-requires" which is
included in "make check". Thus, Travis will run this.
Reference: https://github.com/awesomeWM/awesome/issues/1400
Signed-off-by: Uli Schlachter <psychon@znc.in>
This allows for `DO_COVERAGE=1 make check` with local tests (where
`CI=true` is not given).
It uses the new environment variables to configure the default theme,
instead of creating a temporary config/theme.
- checkout previous commit, so the coverage upload uses the current
code
- do not run coverage reports when testing previous commits
- improve failure message: display subject/author/name for each commit
- Execute the tests without compiling, and don't mess with the source
files when coverage is enabled.
This ensures that the coverage report lines are correct.
This disables the doc tests, as their results would be unused.
Hack: it still expands macros on util.lua, because of
`util.get_themes_dir()` and `util.get_awesome_icon_dir()`, which might
be moved later. Ref:
https://github.com/awesomeWM/awesome/pull/1239#discussion_r93828178.
- ensure that BUILD_APIDOC and DO_COVERAGE are not used together
- awesomeConfig.cmake: add DO_COVERAGE as an option
- Travis: only install codecov with DO_COVERAGE=codecov
- Travis: do not use set -v; use set -x with DO_COVERAGE
- do not use trailing slashes with dirs in tests/examples/CMakeLists.txt / .luacov
- Use latest luacov (0.12.0-1) again
This reverts parts of 4cc6a815.
I think it is better to fix any failure that 4cc6a815 tried to work around.
- Travis: simplify/fix require('luacov') for functionaltests
- tests/examples/CMakeLists.txt: resolve ../.. in SOURCE_DIR
- tests/examples/CMakeLists.txt: add DO_COVERAGE to env
- Cleanup/simplify .luacov: work with SOURCE_DIRECTORY alone
- tests/run.sh: pass through / set SOURCE_DIRECTORY when running awesome
- tests/run.sh: resolve source_dir
- use DO_COVERAGE from env only
This also helps to easier spot failures because of this when looking
at the build matrix.
- Add new check-qa target, to be run only once.
- Add explicit check-unit-coverage target, used with DO_COVERAGE.
Instead of using Xlib for parsing resource files, this now uses the
dedicated xcb-based library that is meant for exactly this task.
Fixes: https://github.com/awesomeWM/awesome/issues/1176
Signed-off-by: Uli Schlachter <psychon@znc.in>
The build is no longer aborted when one of the "example tests" produces a
message on stderr. However, on Travis this requirement is still made. This
should catch "bad errors" via Travis while not breaking the build for users.
Fixes: https://github.com/awesomeWM/awesome/issues/821
Signed-off-by: Uli Schlachter <psychon@znc.in>
With luacov 0.12.0-1 our travis build fails. It was always kinda broken, but now
this breakage is revealed.
What likely happens: Our .luacov errors out because some needed environment
variable to figure out where to put the results is not set. Due to the way we
load luacov, it runs with its default config which luckily happens to work. With
luacov 0.12.0-1 the error is propagated instead and the build fails.
Signed-off-by: Uli Schlachter <psychon@znc.in>
