This is an easy to use compressed unprivileged Linux container packed into a single executable that works on most Linux distros. It is designed to be as simple and user-friendly as possible. You can use it to run any applications, including games (Vulkan and OpenGL).
* Compressed (with squashfs or dwarfs), so it takes a lot less disk space than uncompressed containers and may provide faster filesystem access in some cases.
* Contains many libraries and packages so it can run almost everything. And you don't need to install anything on your main (host) system. **You can even run 32-bit applications on pure 64-bit systems**.
* Based on Arch Linux, contains latest software (including latest videodrivers).
* Almost completely seamless experience. All applications that you run with Conty read and store their configs in your HOME directory as if you weren't using the container at all.
* No performance overhead. Since it's just a container, there is virtually no performance overhead, thus all applications will run at full speed. Regarding memory usage, Conty uses a bit more memory due to compression and because applications from the the container can't share libraries with your system apps.
In its default release, it includes, among others, these apps: `Wine-GE, Steam, Lutris, PlayOnLinux, GameHub, Minigalaxy, Legendary, Bottles, MultiMC, MangoHud, Gamescope, RetroArch, PPSSPP, PCSX2, DuckStation, OBS Studio, OpenJDK, Firefox`. The full list can be read in the [latest release's pkg_list.txt](https://github.com/Kron4ek/Conty/releases/latest/download/pkg_list.txt).
You can download a ready-to-use release from the [**releases**](https://github.com/Kron4ek/Conty/releases) page or create your own (the instructions are [below](#how-to-create-your-own-conty-executables)). Make it executable via `chmod` or your file manager's Properties option (right-click or Alt+Enter) before running.
```
$ chmod +x conty.sh
```
Chmod only need to be executed once (per file). You can now [start using Conty](#usage).
The only requirements are `fuse3` (or `fuse2`) and `coreutils`. And your `/tmp` directory should allow files execution (which it does by default on most distros).
Your Linux kernel must be at least version 4.4 and should support unprivileged user namespaces. On some Linux distros this feature is disabled by default and can be enabled with sysfs:
Even if unprivileged user namespaces are not supported by your kernel, you can still use Conty if you have bubblewrap with the SUID bit installed on your system, in this case just tell Conty to use system-wide utils instead of the builtin ones.
Conty can be run from a terminal emulator. To run a program inside Conty, simply put the path to `conty.sh` as a prefix and then insert the program's binary name or the full path to it and launch arguments (if needed).
Running Conty from a terminal emulator is not strictly required, if your file manager allows running executables, you can also run Conty from it in which case it will show its graphical interface. You can also manually invoke the GUI from terminal with `conty.sh -g`.
Currently, to check the binaries / commands in Conty, you can use "Select File" and browsing to the `/usr/bin` directory, or by using `ls /usr/bin` using the "Open a terminal" option.
However, the GUI will not notify you about errors, so i recommend running Conty from a terminal emulator to see if there are any errors, at least if you've never used Conty before.
---
There are many packages and usecases that are included in the default `conty.sh` from the releases page, such as:
You can also install your own file manager if you want to, but note that file manager will browse the root inside of Conty except for directories that are mounted from the user's root. `/home` is mounted by Conty to allow access to the user's home files.
Note that you cannot run AppImage from Conty (this includes AppImage installed from AUR through Conty's package manager) except for extracting the AppImage's content, after which you may use the manually extracted content.
</p></details>
There are many other features, see the internal help for more information.
Much like an AppImage, there is no need to install Conty. However, many distribution includes `$HOME/.local/bin` as part of their `PATH` should the folder exists. You may put Conty there, so that it can be accessed from terminal using `conty.sh` without inputting the full path.
To check if you have the directory inside your `PATH`, first create the folder, and then use `echo $PATH`. If your distribution does not include the directory, you can add it by adding `export PATH=$PATH:$HOME/.local/bin` somewhere inside the `~/.bashrc` file.
In addition, Conty can batch export all .desktop files inside Conty's `/usr/share/applications` to user's `$XDG_DATA_HOME/applications/Conty` folder (typically means `~/.local/share/applications/Conty`) so that the applications installed in Conty can be accessed from user's application launcher.
This command will create the folder and export the files there, append `Conty` to all exported application's name and .desktop filename, and insert Conty's path to the executable path as a prefix. In addition, it will also export all environment variables and arguments relating to Conty, such as [sandboxing options](#sandbox).
<details><summary>Example</summary><p>
Conty is located in `$HOME/.local/bin/conty.sh`. Then, you ran the following command:
Firefox (and other apps) will be exported to `~/.local/share/applications/Conty` as `firefox-conty.desktop`, it will show up in your menu as `Firefox (Conty)`, and the `Exec=` line inside the exported file will be changed from `env UBUNTU_MENUPROXY=0 /usr/lib/firefox/firefox` to `env HOME_DIR="/home/$USER/Documents/Conty" "/home/$USER/.local/bin/conty.sh" --bind /home/$USER/.steam /home/$USER/.steam env UBUNTU_MENUPROXY=0 /usr/lib/firefox/firefox`.
</p></details>
If `$XDG_DATA_HOME/applications/Conty` already exists, `conty.sh -d` will instead delete the folder. If you have modified any .desktop files inside that folder, it is recommended for you to move or back it up to a different folder.
* First of all, you can simply download latest release from the [releases page](https://github.com/Kron4ek/Conty/releases), i usually upload a new release about every month.
* You can use the self-update feature (`./conty.sh -u`) integrated into Conty, it will update all integrated packages and will rebuild the squashfs/dwarfs image. Read the internal help for more information about it.
* You can manually create a Conty executable with latest packages inside, read the [How to create your own Conty executables](#how-to-create-your-own-conty-executables) section below.
* You can clone the repository and [use GitHub Actions](#automated-github-actions) to get new Conty file according your specifications, every week (see Automated section below).
1. Obtain Arch Linux boostrap by using `create-arch-bootstrap.sh`. Before running it, you can edit the script if you want , for example, to include a different set of packages inside the container, or to include additional locales. Make sure you have enough free disk space, i recommend at least 10 GB of free space. Root rights are required for this step.
```
# ./create-arch-bootstrap.sh
```
2. After that you can use `enter-chroot.sh` to chroot into the bootstrap and do some manual modifications (for instance, modify some files, install/remove packages, etc.). Root rights are needed for this step too. This is an optional step, which you can skip if you wish.
3. Now use `create-conty.sh` to create a SquashFS (or DwarFS) image and create a ready-to-use Conty executable. Root rights are not needed for this step. By default a SquashFS image with zstd compression (level 19) will be created, however, if you want, you can edit the script and enable DwarFS, select a different compression algorithm and/or compression level.
For the sake of convenience, there are pre-compiled binaries (utils.tar.gz) of bwrap, squashfuse and dwarfs and their dependencies uploaded in this repo, `create-conty.sh` uses them by default. If you want, you can compile your own binaries by using `create-utils.sh`, it will compile all needed programs and create utils.tar.gz.
This repository has GitHub workflows that allows you to make GitHub automatically generate a new Conty binary of your specification, every week or at any time you want.
To start, first fork this repository. Then, you may edit the `create-arch-bootstrap.sh` inside the new repository, to build the packages you want. Then go to the Actions tab.
In the Actions tab, go to the Conty CI section in the left-hand menu. Choose "Run Workflow". This will make GitHub make you a new Conty binary. [By default](https://github.com/Kron4ek/Conty/blob/master/.github/workflows/conty.yml#L5), it will also generate a new Conty binary every Friday (you can use a [cron time expression](https://crontab.cronhub.io/) to change the schedule).
* **SANDBOX** - enables the sandbox feature itself. Isolates all user files and directories, creates a fake temporary home directory (in RAM), which is destroyed after closing the container.
* **SANDBOX_LEVEL** - controls the strictness of the sandbox. There are 3 available levels, the default is 1. Level 1 isolates all user files; Level 2 isolates all user files, disables dbus and hides all running processes; Level 3 does the same as the level 2, but additionally disables network access and isolates X11 server with Xephyr.
* **DISABLE_NET** - completely disables internet access.
* **HOME_DIR** - sets a custom home directory. If you set this, HOME inside the container will still appear as /home/username, but actually a custom directory will be used for it.
*`--bind SRC DEST` - binds (mounts) a file or directory to a destination, so it becomes visible inside the container. SRC is what you want to mount, DEST is where you want it to be mounted. This argument can be specified multiple times to mount multiple files/dirs.
*`--ro-bind SRC DEST` - same as above but mounts files/dirs as read-only.
Other bubblewrap arguments are supported too, read the bubblewrap help or manual for more information.
Note that when **SANDBOX** is enabled, none of user files are accessible or visible, for any application that you run in this mode your home directory will be seen as completely empty. If you want to allow access to some files or directories, use the aforementioned `--bind` or `--ro-bind` arguments.
These options (and any Conty-related arguments and variables exported in `env` at the time) will be exported by `conty.sh -d` into part of all exported apps .desktop files in `$XDG_DATA_HOME/applications/Conty`. If you want multiple options, you can export it once with a specific config, rename the `Conty` folder, and then export a different set of .desktop files.
If you just want a sandboxing functionality but don't need a container with a full-size Linux distro inside (which is what Conty mainly is), i recommend to take a look directly at these projects: [bubblewrap](https://github.com/containers/bubblewrap) and [firejail](https://github.com/netblue30/firejail). Sandboxing is a good additional feature of Conty, but is not its main purpose.
Conty releases from the releases page include `Wine-GE`, and if you build your own Conty you will get `Wine-Staging` by default (but you can change that).
As for prefix management, it's the same as with any other Wine build, the container does not affect it. The default prefix is `~/.wine`, but you can specify a custom prefix path with the `WINEPREFIX` environment variable.
`DXVK` and `vkd3d-proton` are not installed by default (unless they are already in your prefix), but can be easily installed, for example, via `winetricks` if you need them:
```
$ ./conty.sh winetricks dxvk vkd3d
```
As already mentioned in the [Usage](#usage) section, Windows applications can be launched like this:
```
$ ./conty.sh wine someapplication.exe
```
If you have new enough Linux kernel (5.16 or newer), it's a good idea to enable `FSYNC` to improve Wine performance:
* Nvidia users with the proprietary driver will experience problems running graphical applications if their Nvidia kernel module version mismatches the version of the Nvidia libraries inside Conty. This applies only to the proprietary driver, Nouveau should work fine without any additional actions (of course, if your GPU is supported by it). AMD and Intel GPUs are not affected by this issue.
For example, if the version of your Nvidia kernel module is 460.56 and the libraries inside the container are from 460.67 version, then you won't be able to run graphical applications.
* The first and the easiest solution is to use the `NVIDIA_HANDLER` feature of Conty, it will automatically download and pass the appropriate driver version into the container. In the latest verison of Conty this feature is enabled by default and should fix the problem automatically. It hasn't been extensively tested yet, so if it does not work for you, i would appreciate it if you could leave a feedback [here](https://github.com/Kron4ek/Conty/discussions/74), mentioning your Linux distro and Nvidia driver version.
* The second solution is to install the same driver version as included inside Conty, which is usually the latest non-beta version. You can see the exact driver version in pkg_list.txt attached to each Conty release. Of course if your GPU is not supported by new drivers, this is not an option for you.
* The third solution is to (re)build Conty and include the same driver version as installed on your system. Read the [How to create your own Conty executables](#how-to-create-your-own-conty-executables) section, you will need to edit the `create-arch-bootstrap.sh` script or use the `enter-chroot.sh` script to include a different driver version. For instance, if you want to include legacy 470xx or 390xx drivers, edit the `create-arch-bootstrap.sh` script and replace `nvidia-utils` and `lib32-nvidia-utils` with `nvidia-470xx-utils` and `lib32-nvidia-470xx-utils` (replace 470xx with 390xx if you need 390xx drivers) in the `video_pkgs` variable, and then build Conty following the instructions.
* Some Windows applications running under Wine complain about lack of free disk space. This is because under Conty root partition is seen as full and read-only, so some applications think that there is no free space, even though you might have plenty of space in your HOME. The solution is simple, just run `winecfg`, move to "Drives" tab and add your `/home` as an additional drive (for example, `D:`), and then install applications to that drive. More info [here](https://github.com/Kron4ek/Conty/issues/67#issuecomment-1460257910).
* AppImages do not work under Conty. This is because bubblewrap, which is used in Conty, does not allow SUID bit (for security reasons), which is needed to mount AppImages. The solution is to extract an AppImage application before running it with Conty. Some AppImages support `--appimage-extract-and-run` argument, which you can also use.
* Application may show errors (warnings) about locale, like "Unsupported locale setting" or "Locale not supported by C library". This happens because Conty has a limited set of generated locales inside it, and if your host system uses locale that is not available in Conty, applications may show such warnings. This is usually not a critical problem, most applications will continue to work without issues despite showing the errors. But if you want, you can [create](https://github.com/Kron4ek/Conty#how-to-create-your-own-conty-executables) a Conty executable and include any locales you need.
* Conty may have problems interfacing with custom url protocols (such as `steam://` and `sgdb://`), apps that uses Native Host Messengers (such as browser extensions for Plasma Host Integration / KDE Connect, KeePassXC, and download managers), and login token exchange (such as trying to log-in a natively-installed GitHub Desktop app with a browser inside Conty) if there is packages that handle such protocols installed (for example, `plasma-browser-integration` for KDE Plasma extension inside browser).
